Nexo DTD-TU gives advanced speaker control for ID, P, PS and LS series, with NXAMP technology built in.
There are four (4) different DTD controllers available by Nexo. Touring or Installation – each available with or without DANTE.
DTD-TU is the ‘standard’ (non-Dante) touring version, and is the most popular DTD controller at Factory Sound.
It provides sophisticated control over crossover, EQ and time-alignment – along with speaker protection. DTD-TU is very easy to use, with automatic amplifier sensing and simple Sub Gain, Main Gain and Crossover Mode control available directly from the front panel. It combines efficient speaker processing with a flexible range of inputs including stereo balanced analog inputs, an AES input and a USB port enabling direct driverless audio playback from laptops, etc.
DTD uses state-of-the-art audio processing to deliver high- precision EQ and Linear Acoustic Phase algorithms, phase-compatible with all ID, P, PS and LS series cabinets, along with other speakers in the NEXO range. High-end AD and DA converters and 64-bit/96kHz processing ensure an analog in-to-analog-out dynamic range greater than 112dB, with distortion kept to under 0.001%.
Sampling frequency and resolution: 48/96 KHz, 64 bits internal processing precision |
Signal delay: Less than 1 ms (analog in to out) on flat setup, compatible with NXAMP latency |
Frequency response: 20 Hz to 20 KHz, +/-0.5 dB (mains out), 20 Hz to 2 KHz +/-0.5 dB (sub out) |
Total harmonic distortion: Less than 0.001% (mains out), less than 0.02% (sub out) |
Dynamic range: 112 dB (unweighted, mains out), 107 dB (unweighted, sub out) |
Crosstalk / Channel separation: -100 dB (1KHz) |
Indicators: Input signal/peak (green/red), amp in signal (green), speaker protect (yellow) |
Display: White backlit graphical OLED display 96 x 16 pixels |
Switch and rotary knobs: 3 position switch + 2 x rotary knobs |
ANALOG INPUTS CHARACTERISTICS |
Number of channels: 2 electronically balanced analog inputs |
Connectors: 2 x XLR-F with link on XLR-M |
Sampling frequency and resolution: 96 KHz / 24 bits |
Max. input level / Input impedance: +22 dBU / 20 KOhms |
ANALOG OUTPUTS CHARACTERISTICS |
Number of channels: 3 electronically balanced analog outputs |
Connectors: 3 x XLR-M |
Sampling frequency and resolution: 48/96 KHz, 24 bits |
Max. output level / Output impedance: + 22 dBU / 200 Ohms |
AMPLIFIER SENSING INPUTS |
Number of channels: 4 floating electronically balanced high voltage analog inputs |
Connectors: 2 x 4 pole SP connectors |
Sampling frequency and resolution: 48/96 KHz, 24 bits |
Max. input level / Input impedance: +50 dBU (8000 Watts / 8 Ohms) / 364 KOhms |
AES INPUTS CHARACTERISTICS |
Number of channels: 1 AES/EBU stereo digital input |
Connectors: 1 x XLR-F |
Sampling frequency and resolution: 44.1 to 96 KHz / 16, 20 or 24 bits |
DANTETM INPUT CHARACTERISTICS (DTD-T-N) |
Number of channels: 2 x Dantetm channels |
Connector: 1 x ruggedised RJ45 |
Sampling frequency and resolution: 48-96 KHz / 24 bits |
USB INPUT CHARACTERISTICS |
Type: 2 channels of USB audio |
Connector: Female mini USB connector type B |
Sampling frequency and resolution: 48 KHz / 16 bits |
Remote Control (DTD-T): Mini USB |
Remote Control (DTD-T-N): Mini USB + RJ45 |
Dimensions (W x H x D): 480 (W) x 44 (H) x 65 (D) mm, 1U |
Weight: 1.3 Kg |
Power supply voltage: 90 V – 240 V 50/60 Hz |
Power consumption: 20 W max |
Heat dissipation (per hour): 20 Kcal max |
Operating temperature range: 0°C – 40 °C |
Storage temperature range: -20 °C – 60 °C |
By clicking Sign Up you’re confirming that you agree with our Terms and Conditions.
MELBOURNE 75-85 York St, South Melbourne VIC 3205
Weekdays 9:30am – 6:00pm
Saturdays 10:00am – 4:00pm
Sundays Closed
Weekdays 8:00am – 6:00pm
Saturdays 10:00am – 4:00pm
Sundays Closed