$479.00 Original price was: $479.00.$415.00Current price is: $415.00.
2 in stock
What could be more rock solid? All of the important bits are held inside, protected by a 14-gauge steel force-field. The inputs are: stereo mini jack, stereo 1/4″ jack, and 2 x RCA (with throughput). Internal transformer isolation removes ground loops, making this perfect for laptop, minidisk, i-Pod or unbalanced DJ mixer connection to a professional PA or recording system. 2 x XLR outputs, powered via Phantom only.
Intended for professional field use, the JPC comes fully loaded with choice of ¼”, RCA and 3.5mm input connectors that make it easy to interface with all types of unbalanced audio sources such as computers, iPods, and CD players. It is equipped with isolation transformers to eliminate hum and buzz caused by ground loops and to further reduce system noise; while AC blocking capacitors in the active circuit prevent pollution from the audio system from bleeding back into the computer. Outputs are XLR balanced mic level for easy interface to snake systems and PAs. Powering the JPC is accomplished via 48V phantom from a mixing console. This enables the JPC to be used in concert environments without requiring an external power supply.
Audio circuit type: Unity Gain buffers and inverters using low noise high end audio grade operational amplifiers |
Frequency response: 20Hz ~ 20kHz +/- 2dB |
Signal to noise ratio |
Dynamic range: 111dB |
Noise floor: -97dB below 0dB Out |
Equivalent input noise: -94dBu |
Maximum input: +17dBu |
Phase deviation: +29º at 20Hz | -5º at 1kHz | -80º at 20kHz |
Total harmonic distortion: 0.01% @ -15dBu Output |
Inter-modulation distortion: Less than 0.15% at any level below clipping |
Input impedance: 10kΩ |
Output impedance: 600Ω |
Features |
Input pad: -15dB |
48V power LED: Two 48V phantom indicators, one for each channel |
Ground lift: Disconnects pin-1 at the XLR outputs |
XLR configuration: AES standard (pin-2 hot) |
General |
Power: 48V Phantom Power (each channel requirers 48V phantom) |
Construction: 14 gauge steel chassis and outer shell, baked enamel finish |
Size: 84 x 127 x 48mm |
Weight: 720 g |
Warranty: 3-year |
By clicking Sign Up you’re confirming that you agree with our Terms and Conditions.
MELBOURNE 75-85 York St, South Melbourne VIC 3205
Weekdays 9:30am – 6:00pm
Saturdays 10:00am – 4:00pm
Sundays Closed
Weekdays 8:00am – 6:00pm
Saturdays 10:00am – 4:00pm
Sundays Closed