out of stock


P15 single cabinet. Black Touring Version

out of stock




Out of stock

Don't worry! Enter your email and we'll notify you when it's available again.

Nexo P15 is a high performance 15″ point source speaker with a coaxial configuration for perfect phase alignment, exceptional clarity and a smooth response across the full frequency range.

NEXO has always been well-known for its compact and very powerful point source speakers, ideal in both FOH and wedge application. P15 enclosure uses a 15 mm custom made bent plywood shell, with poplar veneer for the inside layers and birch on the outside. The result is a robust enclosure with exceptionally good sound quality and light weight.

The custom-designed common neodymium magnet coaxial driver with a 3.5” voice coil for the LF driver and a 3” diaphragm for the HF motor is the heart of the P15 and responsible both for its smooth, clean sound and enormous power.

Bass-reflex tuning is done through two computer-optimised shaped ports, which guarantee ultra-low distortion even at very high level. Two large comfortable handles on each side hold a 35 mm pole stand adapter and a Speakon® connector for discrete connection when on pole stand or in wedge monitor mode.

The back plate holds two Speakon® connectors and a recessed switch to change the cabinet from 2-way passive to 2-way active mode.

P15 works exceptionally well with L18 subwoofer for all kinds of high-powered applications.

Talk with Factory Sound about the best way to configure a P-Series Nexo system to suit your venue space, or your coverage requirements. We have been Nexo specialists for many years.

Weight: 23kg

WxHxD: 483 x 600 x 352mm

Frequency Response @-6 dB: 57 Hz – 20 kHz
Sensitivity 1W@1m: 108 dB SPL Nominal
Peak SPL@1m: 139 dB Peak (Passive mode) / 141 dB Peak (Active mode)
Operating Voltage: 55 Vrms (180 Vpeak)
HF Dispersion (according to flanges): 60°x60° (Default) – 90°x40° (with 90×40 flange) – 60°~100°x40° (with PS flange)
Crossover Frequency: 57 H, 85 Hz, 120Hz
Nominal Impedance: Active mode: (8 Ω LF + 8 Ω HF) / Passive mode: 8 Ω
Recommended Power: Active: (800 to 1350 W LF + 400 to 630 W HF) / Passive: 800 to 1350 W
Components: 1 x Coaxial Neodymium LF 15” 8 Ohms long excursion & HF 3“ 8 Ohms
Number of ways (Touring version): 2 ways passive (2+/2- P15) or 2 ways active (1+/1- LF, 2+/2- HF) switchable
Number of ways (Install version): 2 ways passive
Connectors (Touring version): 4 x NL4, 4 poles connectors (1 per handle + 2 at the back)
Connectors (Install version): 1 x Cable gland with 2 cores cable
Rigging points: 1 x universal accessory fit on each side + 1 x on the bottom
Material: Custom made bent plywood of baltic birch and poplar
Finish: Black or White structural paint
Front Finish (Touring version): Steel front grille + back mesh
Front Finish (Install version): Acoustic fabric fitted front gril
Weight Net: 23 kg
Height x Width x Depth: 600mm x 483mm x 352 mm
Operating temperature range: 0°C – 40°C
Storage temperature range: -20°C – 60°C
System Operation
Recommended powering solution: NXAMP4x2mk2 Powered TDcontroller: up to 2 x P15 per channel
Optional powering solution: DTDcontroller + DTDAMP4x1.3 : 1 x P15 per channel
: NXAMP4x1mk2 Powered TDcontroller (Bridged): up to 2 x P15 per channel
: NXAMP4x4mk2 Powered TDcontroller: up to 4 x P15 per channel


“It rejects off-axis sounds brilliantly, so there’s no danger of other drums or instruments bleeding into the kick drum recordings. This saves a lot of time and effort during the EQ stage of the mixing process.”

Darren, Head of Technical Sales

related products

out of stock


RRP $16,200.00



RRP $27,300.00


out of stock


RRP $11,300.00


out of stock


RRP $5,200.00


out of stock


RRP $2,100.00


Save products to your wish list, track orders,
see order history and access exclusive deals.