dbx 376

Tube Channel Strip w/ Digi Out

Order Code: 376
Our Price: $994.00

Excellent pre-amp for use with a number of Digital Audio Workstations. Includes mic/line switch, +48V phantom, 3-Band Parametric EQ, Compressor & De-Esser. Front panel instrument input, drive meter LEDs, threshold and de-Esser meters, 8 segment analog or digital meter. Type IV¬ conversion w/ selectable sampling rate (96, 88.2, 48, 44.1kHz) & 24, 20 and 16 bit wordlengths. Analog, AES/EBU and S/PDIF digital outputs, dither and noise-shaping algorithms & word clock sync I/O.

Photo of dbx 376 available from Factory Sound
  • 376
  • 376_f1
  • 376_f2
  • 376_f3
  • 376_r1
  • 376_r2
  • 376_r3
  • Tube microphone pre-amp
  • 200V tube plate voltage
  • Selectable mic/line switch
  • +48 Volt phantom power
  • 3-Band Parametric EQ
  • Compressor
  • De-Esser
  • Front panel instrument input
  • Drive meter LEDs
  • Threshold and De-Esser meters
  • 8 segment analog or digital meter
  • Type IV® conversion system
  • Selectable sampling rate (96, 88.2, 48, 44.1kHz)
  • 24, 20 and 16 bit wordlengths
  • AES/EBU and S/PDIF digital outputs
  • Selectable dither and noise-shaping algorithms
  • Word clock sync input and output
Mic Preamp Connector Female XLR Pin 2 Hot; Electronically balanced/unbalanced
Mic Preamp Input Impedance 330Ω
Mic Preamp max input level -9 dBu or +11 dBu with 20 dB pad engaged
CMRR >40dB, Typically 55dB
Mic Preamp Equivalent Input Noise (EIN) Typically -120 dBu with a 150Ω source load, 20Hz to 20kHz BW
Input Connectors (instrument/line) 1/4" Jack
Input Type (line) Electronically balanced/unbalanced; (instrument) Unbalanced
Max Input (instrument/line) +21dBu balanced or unbalanced
Gain Adjustment Range (drive control) Line/Instrument: -15dB to +15dB; Mic: +30dB to +60dB
Output Connectors Male XLR Pin 2 Hot and TRS 1/4"
Output Type Servo-balanced/unbalanced
Output Impedance Balanced 120Ω, unbalanced 60Ω
Max Output >+21 dBu, >+20 dBm (into a 600Ω load)
Insert Connector TRS 1/4" Unbalanced
Insert Impedance 100Ω (SEND), 20kΩ (RETURN)
Digital Output Connector XLR for AES/EBU, RCA for S/PDIF
Digital Output Impedance 110Ω for AES/EBU, 75Ω for S/PDIF
Word Sync I/O Connectors BNC
Word Sync Input Impedance 75Ω terminated by internal jumper
Word Sync Input 96, 88.2, 48, or 44.1kHz word clock
Word Sync Output 96, 88.2, 48, or 44.1kHz word clock
Output Level -20dB to +20dB
Line Switch Selects between microphone and line inputs
Mic Preamp Phantom Power +48V
Pad Switch 20dB pad
Phase Invert Switch Reverses pins 2 and 3 of the microphone input XLR
Low cut Switch 75Hz, 12dB/octave high pass filter
Frequency Response (analog) <10Hz to 75kHz
THD+Noise 0.35% typical at +4dBu out, 1kHz, 40 dB gain
EQ Low Frequency 80 Hz, shelving filter
EQ High Frequency 12 kHz, shelving filter
EQ Mid Frequency Sweepable from 100 Hz to 8 kHz, bandwidth 1.5 octaves
EQ Gain (all bands) Sweepable from –15 to +15 dB
Compressor Threshold Range -40 dBu to +20 dBu
Compressor Threshold Characteristic Selectable OverEasy® or Hard Knee
Compressor Ratio Variable; 1:1 to Infinity:1; 60 dB maximum Compression
Compressor Attack Time Program-dependent; Typically 5 ms (SLOW disabled), 15 ms (SLOW enabled) for 15 dB Gain Reduction
Compressor Release Time Program-dependent; Typically 50 dB/sec (SLOW disabled), 8 dB/sec (SLOW enabled)
De-esser Characteristic Wideband gain reduction
De-esser Frequency Range 800 Hz to 10 kHz High Pass
De-esser Release Time 12 dB/octave program-dependent; approximately 1 ms/dB
A/D Converter dbx® Type IV® A/D Conversion System
Sample Rate 96, 88.2, 48, or 44.1kHz selectable
Wordlength 24, 20, or 16 bit selectable
Dither Type TPDF, SNR2, or none
Noise Shape Shape 1, Shape 2, or none
Digital Output S/PDIF or AES/EBU
Digital Output Dynamic Range 107dB typical, A-weighted, 22kHz bandwidth
Operating Voltage DO: 120VAC 60Hz, 100VAC 50/60Hz; EU: 230VAC 50/60Hz
Power Consumption 35W