RCF ART935A is masterfully engineered to deliver stellar audio performance and versatility for intensive audio applications.
The combination of a 3″ titanium/neodymium compression driver, 15″ woofer, two-channel 2100W amplifier, and the constant directivity True Resistive Waveguide produces coherent 100° x 60° coverage for the listening area with up to 133 dB SPL, distortion-free sound.
Used as a stand-alone speaker for a FOH system, satellite (with subwoofer), stage monitor, or flown, ART935A packs high-performance and reliability in a compact enclosure. Designed to be the most flexible loudspeaker in its class, it also features multiple rigging points for fixed installation. Merging RCF proprietary FiRPHASE and Bass Motion Control (BMC) DSP processing, perfectly tuned for each model, audiences will experience absolute clarity and deep, powerful bass response.
The sleek cabinet uses a special polypropylene composite material with an M-brace internal reinforcement, making it easy to carry and secure to pop straight on a speaker stand, or install via the rigging points.
But where’s the microphone selector switch?
Forget about plugging a mic straight into this one…with so much power under the bonnet, RCF has wisely decided this is strictly a “line level” input only.
Weight: 24.2kg
ART935A features:
- Up to 133 dB Sound Pressure Level
- 2100W Class-D Bi-Amplification
- 45-20000 Hz linear frequency response
- 3″ Titanium/Neodymium Compression Driver
- 15″ Woofer
- FiRPHASE zero degrees phase technology
- Bass Motion Control woofer excursion management
Legendary Transducers.
Superior Compression Drivers: The ND840 Compression Driver in pure Titanium with a 3” voice coil allows a crossover point at only 800 Hz. This allows a better impulse response, fast decay, and superior efficiency. Lightweight and powerful, RCF neodymium drivers are a reference in performance and reliability.
Potent Woofer: The low-frequency transducer is a high-power 15″ woofer with a 3’’ voice coil that delivers tight, punchy bass. Reproduction of the mid-bass frequencies is accurate, transparent, and free from distortion.
Frequency Response: 45 Hz – 20000 Hz
Max SPL @ 1m: 133 dB
Horizontal coverage angle: 100°
Vertical coverage angle: 60°
Compression Driver: 1 x 1.4” neo, 3.0” v.c
Woofer: 15”, 3.0” v.c
Input signal: bal/unbal
Input connectors: XLR, Jack
Output connectors: XLR
Input sensitivity: -2 dBu/+4 dBu
Crossover Frequencies: 800 Hz
Protections: Thermal, RMS
Limiter: Soft Limiter
Controls: Linear, Boost, Stage, Volume
Total Power: 2100 W Peak
High frequencies: 700 W Peak
Low frequencies: 1400 W Peak
Cooling: Convection
Connections: VDE
Cabinet/Case Material: PP Composite
Hardware: 1 x M10 Top, 1 x M10 each side
Handles: 1 Top, 1 each side
Pole mount/Cap: Yes
Grille: Steel
Color: Black
Height: 717 mm
Width: 415 mm
Depth: 410 mm
Weight: 24.2 kg
