RCF ART94A is masterfully engineered to deliver stellar audio performance and versatility for intensive audio applications.
The combination of neodymium transducers – 4″ titanium compression driver, 15″ woofer – two-channel 2100W amplifier, and the constant directivity True Resistive Waveguide produces coherent 100° x 60° coverage for the listening area with up to 135 dB SPL, distortion-free sound.
Used as a stand-alone speaker for a FOH system, satellite (with subwoofer), stage monitor, or flown, ART945A packs high-performance and reliability in a compact enclosure. Designed to be the most flexible loudspeaker in its class, it also features multiple rigging points for fixed installation. Merging RCF proprietary FiRPHASE and Bass Motion Control (BMC) DSP processing, perfectly tuned for each model, audiences will experience absolute clarity and deep, powerful bass response.
The sleek cabinet uses a special polypropylene composite material with an M-brace internal reinforcement, making it easy to carry and secure to pop straight on a speaker stand, or install via the rigging points.
But where’s the microphone selector switch?
Forget about plugging a mic straight into this one…with so much power under the bonnet, RCF has wisely decided this is strictly a “line level” input only.
ART945A features True Outdoor Protection (TOP) PowerCON TRUE1 power input connectors. These ruggedised sealed connectors feature not only IP protection but also UV resistance approved according to UL50E.
- Up to 135 dB Sound Pressure Level
- 2100W Class-D Bi-Amplification
- 45-20000 Hz linear frequency response
- 4″ Titanium/Neodymium Compression Driver
- 15″ Neodymium Woofer
- FiRPHASE zero degrees phase technology
- Bass Motion Control woofer excursion management
Superior Compression Drivers: The ND940 Compression Driver in pure Titanium with a 4 inches voice coil allows a crossover point at only 650 Hz. This allows a better impulse response, fast decay, and superior efficiency. Lightweight and powerful, RCF neodymium drivers are a reference in performance and reliability.
Potent Woofer: The low-frequency transducer is a high-power 15’’ neodymium woofer with a 3.5’’ voice coil that delivers tight, punchy bass. Reproduction of the mid-bass frequencies is accurate, transparent, and free from distortion.
Frequency Response: 45 Hz – 20000 Hz
Max SPL @ 1m: 135 dB
Horizontal coverage angle: 100°
Vertical coverage angle: 60°
Compression Driver: 1 x 1.4” neo, 4.0” v.c
Woofer: 15” neo, 3.5” v.c
Input signal: bal/unbal
Input connectors: XLR, Jack
Output connectors: XLR
Input sensitivity: -2 dBu/+4 dBu
Crossover Frequencies: 650 Hz
Protections: Thermal, RMS
Limiter: Soft Limiter
Controls: Linear, Boost, Stage, Volume
Total Power: 2100 W Peak
High frequencies: 700 W Peak
Low frequencies: 1400 W Peak
Connections: Powercon TRUE1 TOP IN/OUT
Cabinet/Case Material: PP Composite
Hardware: 1 x M10 Top, 1 x M10 each side
Handles: 1 Top, 1 each side
Pole mount/Cap: Yes
Height: 717 mm
Width: 415 mm
Depth: 410 mm
Weight: 22.1 kg