The Yamaha CL3 is a professional digital mixing console designed for live sound reinforcement and broadcast scenarios
It offers a seamless mixing experience with its intuitive interface, extensive channel count, and robust construction
The console is equipped with 64 mono and 8 stereo channels, 24+2 faders for hands-on control, and a comprehensive range of input and output options
With its advanced features and high-quality audio performance, the CL3 is a reliable choice for any professional audio environment.
External: 44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm), 48kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) |
Signal delay: Less than 2.5ms, OMNI IN to OMNI OUT, Fs=48kHz |
Total harmonic distortion: Less than 0.05% 20Hz-20kHz@+4dBu into 600Ω, OMNI IN to OMNI OUT, Input Gain = Min. |
Frequency response: +0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, OMNI IN to OMNI OUT |
Dynamic range: 112dB typ.: DA Converter / 108dB typ.: OMNI IN to OMNI OUT, Input Gain = Min. |
Residual output noise: -88dBu, Residual output noise, ST master off |
Crosstalk: -100dB*1, adjacent OMNI IN/OMNI OUT channels, Input Gain = Min. |
Power requirements: US/Canada: 120V 60Hz, Japan: 100V 50/60Hz, China: 110-240V 50/60Hz, Korea: 220V 60Hz, Other: 110-240V 50/60Hz |
Power consumption: 170W: Internal Power Supply / 200W: Simultaneous use of Internal PSU and External PW800W |
H: 299mm (11 3/4in) |
D: 667mm (26 1/4in) |
Net weight: 29kg (63.9lb) |
Others: Temperature Range: Operating temperature range: 0 – 40?, Storage temperature range: -20 – 60? |
Mix Buses: 24 |
Matrices: 8 (Input to Matrix supported) |
Stereo Bus: 1 |
Mono: 1 |
Cue: 1 (Second Cue Bus supported in CL V4.0 or later) |
Analog Outputs: 8 |
MY Slots: 3 |
Dante I/O: Primary / Secondary |
Digital Out: 1 (AES/EBU) |
GPI: 5 in / 5 out (CL V1.11 or later) |
Word Clock I/O: Yes |
MIDI I/O: In / Out |
External Redundant PSU: Optional PW800W |
Ethernet: Yes |
AC Inlet: V-Lock Type |
Recall Safe: Yes |
Focus Recall: Yes |
Fade Time: Yes (0s ~ 60s) |
Preview: Yes (CL V1.51 or later) |
Selective Load / Save: Yes (CL V1.7 or later) |
Tactile Control Keys: Yes |
Digital Gain: Yes (-96dB ~ +24dB) |
ATT: -96dB ~ 0dB |
HPF: 20Hz ~ 600Hz, -6 or -12dB/oct Selectable (CL V1.51 or later) |
PEQ: 4 Band Full PEQ |
(RTA overlay support in CL V3.0 or later, New EQ Algorithms support in CL V4.0 or later) |
Dynamics 1: Gate / Ducking / Compressor / Expander (Key-in Filter on the Compressor and Expander in CL V4.0 or later) |
Dynamics 2: Compressor / Compander-H / Compander-S / De-esser |
Input Delay: Yes (0ms ~ 1000ms, frame delay support in CL V3.0 or later) |
Pan: CENTER NOMINAL or LR NOMINAL for monaural input channels in CL V3.1 or later |
L-MONO, R-MONO or LR-MONO for stereo input channels in CL V3.1 or later |
DCA Group: 16 (Output DCA and DCA Roll-Out support in CL V2.0 or later, Scrollable DCA Roll-Out support in CL V4.0 or later) |
MUTE Group: 8 |
Number of Inserts: 2 (CL V2.0 or later) |
Direct Out: Yes |
(RTA overlay support in CL V3.0 or later, New EQ Algorithms support in CL V4.0 or later) |
Dynamics 1: Compressor / Expander / Compander-H / Compander-S |
MUTE Group: 8 |
Number of Inserts: 2 (CL V2.0 or later) |
Mountable Device: RND Portico5033 / RND Portico5043 / U76 / Opt-2A / EQ-1A / Dynamic EQ / Buss Comp 369 (CL V3.0 or later) / MBC4 (CL V4.0 or later) |
Number of Effect Programs: 54 |
Mountable Device: Effect / 31BandGEQ / Flex15GEQ / 8Band PEQ (CL V3.0 or later) |
Mountable Device: 31BandGEQ / Flex15GEQ / Dugan Automixer (CL V3.0 or later) / 8Band PEQ (CL V3.0 or later) |
(RTA overlay support in CL V3.0 or later, GEQ gain control from the TOUCH AND TURN knob in CL V4.0 or later) |
Dante Patch from Console: Yes |
DVS Recording: Yes (DVS and Nuendo Live bundled) |
Surround Monitor: Yes (CL V3.0 or later) |
Mix Minus: Yes (CL V2.0 or later) |
L-Mono / R-Mono / LR-Mono: Yes (CL V3.0 or later) |
Second Cue Bus: Yes (CL V4.0 or later) |
(allows the MATRIX 7/8 to be used as a CUE B bus) |
Oscillator: Sine Wave 1ch / Sine Wave 2ch (CL V3.0 or later) / Pink Noise / Burst Noise |
RTA: Yes (CL V3.0 or later) |
Output Port Delay: Yes (0ms ~ 1000ms, frame delay support in CL V3.0) |
Cascade: Yes (via MY slots) |
User Level: Yes |
Help File: Yes (CL V1.51 or later) |
Channel Link: Yes (Output Channel Link support in CL V3.0 or later) |
Channel Copy/Move: Yes |
Control & Monitoring for Digital Wireless Receivers: Shure ULXD4D/ULXD4Q (CL V4.0 or later) |
Centralogic Section: Yes |
Selected Channel Encoders: Gain, HPF, PEQ (controls for 4 bands), Dynamics 1/2(Threshold only), Pan, Mix/Matrix Sends |
Channel Encoder: Yes (for Gain, Send Level, or an assigned parameter) |
Channel Name / Color Display: Yes |
Custom Fader Banks: Yes (customized for each fader section) |
User Defined Keys: 16 (x 4 banks in CL V3.0 or later) |
User Defined Knobs: 4 |
Touch and Turn Knob: Yes (using a User Defined Knob) |
Monitor Level Knob: Yes |
Wooden Arm Rest: Yes |
Rack-mounting: No |
StageMix: CL StageMix (iPad app) |
MonitorMix: Yes (CL V4.00 or later) |
Console File Converter: Yes (Win/Mac) |
By clicking Sign Up you’re confirming that you agree with our Terms and Conditions.
Weekdays 9:30am – 6:00pm
Saturdays 10:00am – 4:00pm
Sundays Closed