DTDIU

NEX-DTDIU

$2,205.00

$2,205.00

Digital TD Controller Standard install Version

Nexo DTD-IU gives advanced speaker control for ID, P, PS and LS series, with NXAMP technology built in.

There are four (4) different DTD controllers available by Nexo. Touring or Installation – each available with or without DANTE.

DTD-IU is the ‘standard’ (non-Dante) installation version, with all connectors (except mini-USB) at the back on the barrier strip. There is no hardware control; everything is set up from a PC/Mac computer connected on the USB port, allowing the settings to be locked – preventing any accidental changes.

It provides sophisticated control over crossover, EQ and time-alignment – along with speaker protection. DTD-TU is very easy to use, with automatic amplifier sensing and simple Sub Gain, Main Gain and Crossover Mode control available directly from the front panel. It combines efficient speaker processing with a flexible range of inputs including stereo balanced analog inputs, an AES input and a USB port enabling direct driverless audio playback from laptops, etc.

DTD uses state-of-the-art audio processing to deliver high- precision EQ and Linear Acoustic Phase algorithms, phase-compatible with all ID, P, PS and LS series cabinets, along with other speakers in the NEXO range. High-end AD and DA converters and 64-bit/96kHz processing ensure an analog in-to-analog-out dynamic range greater than 112dB, with distortion kept to under 0.001%.

Sampling frequency and resolution: 48/96 KHz, 64 bits internal processing precision
Signal delay: Less than 1 ms (analog in to out) on flat setup, compatible with NXAMP latency
Frequency response: 20 Hz to 20 KHz, +/-0.5 dB (mains out), 20 Hz to 2 KHz +/-0.5 dB (sub out)
Total harmonic distortion: Less than 0.001% (mains out), less than 0.02% (sub out)
Dynamic range: 112 dB (unweighted, mains out), 107 dB (unweighted, sub out)
Crosstalk / Channel separation: -100 dB (1KHz)
Indicators: Input signal/peak (green/red), amp in signal (green), speaker protect (yellow)
Display: White backlit graphical OLED display 96 x 16 pixels
ANALOG INPUTS CHARACTERISTICS
Number of channels: 2 electronically balanced analog inputs
Connectors: 2 x terminal block (3-pin / 2.54 mm pitch)
Sampling frequency and resolution: 96 KHz / 24 bits
Max. input level / Input impedance: +22 dBU / 20 KOhms
ANALOG OUTPUTS CHARACTERISTICS
Number of channels: 3 electronically balanced analog outputs
Connectors: 3 x terminal block (3-pin / 2.54 mm pitch)
Sampling frequency and resolution: 48/96 KHz, 24 bits
Max. output level / Output impedance: + 22 dBU / 200 Ohms
AMPLIFIER SENSING INPUTS
Number of channels: 4 floating electronically balanced high voltage analog inputs
Connectors: 1 x terminal block (8-pin / 5.08 mm pitch)
Sampling frequency and resolution: 48/96 KHz, 24 bits
Max. input level / Input impedance: +50 dBU (8000 Watts / 8 Ohms) / 364 KOhms
AES INPUTS CHARACTERISTICS
Number of channels: 1 AES/EBU stereo digital input
Connectors: 1 x terminal block (3-pin / 2.54 mm pitch)
Sampling frequency and resolution: 44.1 to 96 KHz / 16, 20 or 24 bits
DANTE™ INPUT CHARACTERISTICS (DTD-I-N)
Number of channels: 2 x Dante channels
Connector: 1 x RJ45
Sampling frequency and resolution: 48-96 KHz / 24 bits
USB INPUT CHARACTERISTICS
Type: 2 channels of USB audio
Connector: Female mini USB connector type B
Sampling frequency and resolution: 48 KHz / 16 bits
Remote Control Connector (DTD-I-U): Mini USB
Remote Control Connector (DTD-I-N): Mini USB + RJ45
Dimensions (W x H x D): 480 (W) x 44 (H) x 65 (D) mm, 1U
Weight: 90 V – 240 V 50/60 Hz
Power consumption: 20 W max
Heat dissipation (per hour): 20 Kcal max
Operating temperature range: 0°C – 40 °C
Storage temperature range: -20 °C – 60 °C

options to consider

Related Products

Not what you’re looking for? Here are more products from the best global brands.

NEWSLETTER

Sign up for the latest products and offers before everyone else

Join more than 40,000 other audio professionals and enthusiasts.

By clicking Sign Up you’re confirming that you agree with our Terms and Conditions.

DON'T TAKE OUR WORD FOR IT

Customer testimonials

Lorem ipsum dolor sit amet, consectetur adipiscing elit.
Factory Sound
4.7
Based on 194 reviews
powered by Google
brad everybrad every
06:31 05 Dec 23
Elliot the best customer service agent in the business. But the whole staff are a shining example of how service should be.
Marinos KatsanevasMarinos Katsanevas
01:39 03 Dec 23
Derek HaferDerek Hafer
06:17 30 Nov 23
Always friendly service here. Knowledgeable staff with well priced products
Peter BonfiglioPeter Bonfiglio
07:39 05 Nov 23
Very helpful and professional.
Matt IsaacsMatt Isaacs
05:39 18 Oct 23
Went in to get a wireless system for my trumpet. Jason got me sorted on the spot and hooked me up with a better price than was available online. Thanks team!
Jaymz HingertJaymz Hingert
22:22 05 Sep 23
Great service
John NardozzaJohn Nardozza
02:38 20 Jul 23
Quick service and reasonable price. Angus was helpful and transparent.20/07/23 Update. I had an issue with some equipment that I purchased from these guys, and true to form, they were supportive and gave me consistent feedback on the progress of my concern. Elliot and Darren were incredibly committed to getting me a satisfactory result. I have recommended Factory Sound to my mates because I actually believe that they will be taken care of.
Sean McSean Mc
11:36 26 Jun 23
After my experience on the weekend and again today - I would definitely recommend 100%... I am so happy with my pa speakers. The staff are so helpful!
Conor DunneConor Dunne
05:12 20 May 23
The only place to buy pro audio gear from. Been coming here for over 20 years, and a lot of the same staff still look after me. Says a lot about their business. The best service, advice and gear every single time. If they don’t have it, they’ll get it for you. No need to worry about pricing, theirs is ALWAYS the best. All the staff go out of their way to help you, and will always get back to you. Cant’ recommend this place enough, 5 stars doesn’t seem like enough.
john lowndesjohn lowndes
06:34 03 Apr 23
Really nice guys to deal with really know that stuff about the equipment and will not steer you towards a more expensive product if you don't need it
js_loader
User Account
Connect with Factory Sound
Don’t have an account?

Log In

Sign Up

Username *
Email *
password *