Art DualXDirect

Order Code: DualXDirect
Dual Channel Professional Active Direct Box
Sale!
Close

RRP:$134.99 Our price:$105.00 GST

Available on backorder

This is the ART DUALXDirect Two Channel Active DI Box.

DUALXDirect provides two independent high quality active interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs. Each of the high impedance 1/4″ and XLR inputs (provided via “combo” jacks) are buffered and converted by very low noise active electronics into an isolated, balanced, low impedance signal output. The DUALXDirect has an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALXDirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.

Check out the ART Pro Range here.

Key Features:

  • Fully Active Design
  • Converts High-Impedance Balanced / Unbalanced Inputs Into 600 ohm Balanced Outputs
  • Switchable phase invert
  • ¼-Inch TRS | XLR Combi Jack Inputs
  • Phantom Voltage or 9v Battery Powered
  • Switchable input attenuation (0, -20, -40 dB) Switchable low pass filter
  • Rugged Extruded Aluminum Case

 

Specifications:

  • Frequency Response  10 Hz – 100 kHz, ± 0.5 dB @ +0 dBu
  • Total Harmonic Distortion  <.05% (typical)
  • Dynamic Range  >100 dB (typical)
  • Channel Separation  > 80 dB (typical)
  • Maximum Input Level   +4, +34 dBu
  • Maximum Output Level  +6 dBu (battery powered), +14 dBu (phantom powered)
  • Input Connections  ¼-inch TRS | XLR female balanced / unbalanced (2), 470k Ω
  • Thru Connections   ¼-inch TRS (2)
  • Output Connections  XLR male balanced (2), <600 Ω
  • Input Attenuation  Switchable, (0, -30 dB)
  • Power Requirements   9V @ 7.5 mA (battery,Alkaline recommended), 18 – 48V DC @ 6.4 mA (phantom power, per channel)
  • Dimensions  1.85″H x 4.6″W x 3.9″D (47mm x 117mm x 99mm)
  • Weight  0.84 lbs (0.38 kg)