Check, Tick, MaskCurrent Covid-Safe conditions here
Cart 0

Neumann KH310ALG

3-way Active Studio Monitor (Left Speaker)
Sale!
Close

    Contact us today

    Our price:$3,249.00 GST
    Order Code: KH310ALG

    IN STOCK 2 (more can be backordered)

    For uncompromising studio monitoring, Neumann’s 3-way active KH310A monitor simply must be on the list.

    Tri-amped, each of the three drivers are perfectly paired with the appropriate Class AB amplifier:

    Woofer: 210mm (8 ¼”), 150w
    Midrange: 75mm (3”), 70w
    Tweeter: 25mm (1”), 70w

    Add to that the Mathematically Modeled Dispersion Waveguide, a range of controls on the back, including separate acoustic (dip) controls for Bass, Low-Mid and Treble, output level, and input gain, and KH310A is a seriously good studio monitor.

    Note: This is the LEFT speaker, you will also require KH310ARG for the RIGHT speaker

    Features:

    • 8¼” composite-sandwich membrane woofer, 3″ soft dome midrange, 1″ alloy fabric dome tweeter with Mathematically Modeled Dispersion™ (MMD™) Waveguide and protective grille
    • 210 + 90 + 90 W class A/B-amplifiers with thermal protection
    • Compact, sealed, horizontally-oriented enclosure (separate left and right versions)
    • Frequency response: 34 Hz – 21 kHz, (-3 dB)
    • Maximum SPL: 116.3 dB  at 1m
    • Input gain control, output level control, ground lift
    • Fourth-order crossover and 4-position bass, low-mid and treble acoustical controls
    • Self-generated noise level <0 dB(A) at 1 m
    • Limiters: Excursion, Bass, Mid, Treble
    • Independent thermo limiters for woofer, midrange dome and tweeter. Woofer soft clip and excursion limiters.
    • Two-color dimmable Neumann logo
    • Magnetic shielded
    • XLR-balanced analog input
    • Universal switched-mode power supply
    • Dimensions: 253 x 383 x 292 mm (HxWxD)
    • Weight: 13.0 kg

    Acoustics
    Free field frequency response 34 Hz – 21 kHz, ± 3 dB
    Pass band free field frequency response 36 Hz – 20 kHz, ± 2 dB
    Self-generated noise
    (with input gain set to 100 dB for 0 dBu)    		 < 20 dB(A) at 10 cm
    Total harmonic distortion < 0.5 % at 95 dB SPL at 1 m > 85 Hz
    Max. SPL in full space / calc. in half space
    at 3% THD at 1m    		 110.3 / 116.3 dB SPL
    (averaged between 100 Hz and 6 kHz)
    Bass capability: Max. SPL in half space
    at 3% THD at 1m    		 104.5 dB SPL
    (averaged between 50 Hz and 100 Hz)
    Max. short term SPL with IEC-weighted noise
    (IEC 60268-5) at 1 m, in typical listening conditions    		 113 dB(C) SPL
    Max. short term SPL with music material
    at 2.3 m, in typical listening conditions (pair)    		 100 dB(C) SPL (full range)
    107 dB(C) SPL (with subwoofer)
    Max. long term SPL with pink noise at 2.3 m,
    in typical listening conditions (single/pair)    		 93 / 99 dB(C) SPL (full range)
    94 / 100 dB(C) SPL (with subwoofer)

    Electronics
    Bass / Midrange / Treble Class AB amplifiers,
    cont. (peak) output power*    		 150 W (210 W) / 70 W (90 W) / 70 W (90 W)
    Controller design Analog, active
    Crossover frequencies 650 Hz / 2 kHz
    Crossover slope 24 dB/oct, 4th order
    Equalization – Bass 0, −2.5, −5, −7.5 dB
    Equalization – Low Mid 0, −1.5, −3, −4.5 dB
    Equalization – Treble +1, 0, −1, −2 dB
    Protection circuitry Independent thermo limiters for woofer, midrange dome and tweeter.
    Woofer soft clip and excursion limiters
    Infrasonic filter – frequency; slope 15 Hz; 6 dB/oct
    Input XLR, analog electronically balanced
    Impedance, electrically balanced > 13k Ohms
    Input gain control (sensitivity) 0 dB to −15 dB
    Output level control 94, 100, 108, 114 dB SPL
    CMRR > 56 dB @ 100 – 15 kHz
    Max. input level +24 dBu
    Displays and indicators – power on Neumann logo “White”
    Displays and indicators – limit / clip Neumann logo “Red”
    Mains Power Supply, voltage; frequency 100-240 V~; 50/60 Hz
    Power consumption – idle 24 W
    Power consumption – full output 300 W

    Mechanics
    Cabinet surface finish, colour Painted wood and polyurethane,
    Anthracite (RAL 7021).
    Aluminum electronics panel, Black.
    Baffle cover Optional removable metal grille
    Operating conditions +10° C to +40° C,
    <90% RH, non-condensing
    Transport/storage condition −25° C to +70° C,
    <90% RH, non-condensing
    Drivers Magnetically shielded
    Woofer 210 mm (8 1/4″)
    Midrange 75 mm (3″)
    Tweeter 25 mm (1″)
    Mounting points 2 x M8 on side panels, depth from outside of cabinet 25 mm (1”).
    Rear panel screws for attaching LH41 base plate.
    Rear panel bracket.
    Product dimensions
    (height x width x depth), mm    		 253 x 383 x 292 mm
    Product weight 13.0 kg
    Delivery includes 1x KH 310 A
    Mains power cable
    4x Self-adhesive feet
    1x Operating manual
    1x Supplement “Getting Started Quickly”

    Related products