Stereo set – Omnidirectional Pencil Condensers (Nickel)

Our price:$2,579.00 GST
Order Code: KM183STEREOSET

Contact us for expected arrival, queue backorder

This STEREO SET of KM183 cardioid pencil condenser microphones is perfect for recording applications and orchestral use. NICKEL.

It comes packaged in a nice wooden box – but on the inside is the important stuff. You get 2 x KM183 omnidirectional condenser microphones, along with a pair of SG21 (stand mount / mic clip) and a couple of WNS100 (windsocks).

More on KM183:

Omnidirectional wonder – in practical usage, there is no sound colouration over a wide pickup angle, which is crucial in multi-microphone set-ups and for precise stereo/surround imaging. KM 183’s pressure transducer capsule is equalised for a flat frequency response in the diffuse field. In the free field (i.e. close to the sound source), it has a treble boost of approximately 7 dB at 10 kHz. Its innovative transformer-less head amplifier offers a wide dynamic range of 127 dB and is carefully designed to maintain the capsule’s sonic integrity. The KM 183 has a very low self-noise of only 13 dB-A and can handle high sound pressure levels of up to 140 dB free from distortion.

KM 183 is a universal microphone for studio applications. Its transparent sound makes the KM 183 a superb microphone for acoustic instruments, such as piano, percussion, drums, acoustic guitar, strings, woodwinds, brass, choir, and wherever sonic authenticity is paramount.

KM183 features:

  • Omnidirectional pickup pattern
  • Diffuse-field equalized pressure transducer
  • Very low self-noise
  • High SPL capability

In the box:

  • 2 x KM 183 Microphones
  • 2 x WNS 100 Windscreen
  • 2 x SG 21 bk Stand Mount Swivel
  • Wooden box for storage and happiness
Acoustical operating principle Pressure transducer
Directional Pattern Omnidirectional
Frequency Range 20 Hz … 20 kHz
Sensitivity at 1 kHz into 1 kohm 12 mV/Pa ± 1 dB
Rated Impedance 50 ohms
Rated load impedance 1 kohms
Equivalent noise level, CCIR 1 24 dB
Equivalent noise level, A-weighted 2 13 dB-A
Maximum SPL for THD 0.5% 3 140 dB
Signal-to-noise ratio, CCIR (re. 94 dB SPL) 4 70 dB
Signal-to-noise ratio, A-weighted (re. 94 dB SPL) 5 81 dB
Maximum output voltage 10 dBu
Supply voltage (P48, IEC 61938) 48 V ± 4 V
Current consumption (P48, IEC 61938) 3.2 mA
Matching connector XLR 3 F
Weight approx. 80 g
Diameter 22 mm
Length 107 mm

You may also like…