Stereo set – Cardioid Pencil Condensers (Nickel)

Our price:$2,595.00 GST
Order Code: KM184STEREOSET

IN STOCK 3 (more can be backordered)

This STEREO SET of KM184 cardioid pencil condenser microphones is perfect for recording applications and orchestral use.

It comes packaged in a nice wooden box – but on the inside is the important stuff. You get 2 x KM184 cardioid condenser microphones, along with a pair of SG21 (stand mount / mic clip) and a couple of WNS100 (windsocks).

More on KM184:

Cardioid condenser microphone that has captured some of the great sounds over the past few years. Rugged enough to use live, and easily detailed enough to breathe some life into your recordings.

SPL handling up to 138dB makes this mic extremely versatile, with just enough sparkle up the top to make it interesting not distracting. Orchestral or Thumping – use it on either.

Although the KM 184 has the same capsule as the KM 84, the microphone differs slightly on the 0° frequency response: The KM 184 has a gentle rise at about 9 kHz, a characteristic that was introduced very successfully with the KM 140. The result is a tonal balance that is fresher and livelier when compared to the KM 84 with its flat frequency response in that band.

In the box:

  • 2 x KM 184 Microphone
  • 2 x WNS 100 Windscreen
  • 2 x SG 21 bk Stand Mount Swivel
  • Wooden box for storage and happiness

KM 184 features:

  • Uniform cardioid pattern without off-axis coloration
  • Linear frequency response with a slight treble lift
  • Very low self-noise (13 dB-A)
  • Low impedance output for long cable runs without transmission losses
  • Transformerless circuitry
  • Compact size, visually unobtrusive
Directional pattern cardioid
Frequency range 20 Hz – 20 kHz
Sensitivity at 1 kHz into 1 kohm 15 mV/Pa
Rated impedance 50 ohms
Rated load impedance 1 kohms
Equivalent noise level, CCIR 22 dB
Equivalent noise level, A-weighted 13 dB-A
Signal-to-noise ratio (rel. 94 dB SPL) 72 dB
Signal-to-noise ratio, A-weighted (rel. 94 dB SPL) 81 dB
Maximum SPL for THD 0.5% 138 dB
Maximum output voltage 10 dBu
Supply voltage (P48, IEC 61938) 48 V ± 4 V
Current consumption (P48, IEC 61938) 3.2 mA
Matching connectors XLR 3F
Weight approx. 80 g
Diameter 22 mm
Length 107 mm