DPA MMP-B
Preamp: low cut and high boost for Reference Series
Order Code: MMP-BHeart and soul of the 4017B shotgun microphone combination. This preamplifier has cleverly designed low cut and high boost filters to make the most of whatever location recording situation you're likely to come across.
Super lightweight (38g), making it ready for day-long boom applications. Also well-suited to permanent installation above stage for theatre application. Plug MMC4017 in to make this the perfect shotgun combination.
Other preamplifiers in the Reference standard series: MMP-A State-of-the-art preamplifier, and MMP-C compact preamplifier.
| Output connector: | XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase |
| Low-cut frequency, -3 dB: | 8 Hz |
| Noise with shorted input, A-weighted: | 0.5 µV |
| Output voltage, RMS: | > 5 V |
| Output voltage, peak: | > 16 V |
| Output connector: | XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: signal - phase |
| Low-cut frequency, -3 dB: | 50 Hz |
| Noise with shorted input, A-weighted: | 1.1 µV |
| Output voltage, RMS: | > 1.8 V |
| Output voltage, peak: | > 2.5 V |
| Type of electronic circuit: | Active |
| THD@1VRMS, 1kHz: | < 0.5 % |
| Dynamic range: | 124 dB |
| Switchable filters: | High boost: +4 dB at 8 kHz. Low cut: First order filter, below 120 Hz |
| Output impedance: | < 150 ohm |
| Output balance principle: | Signal balanced |
| Common Mode Rejection Ratio (CMRR): | > 40 dB |
| Power supply (for full specifications): | 48 V Phantom power (± 4 V) |
| Current consumption: | 4.5 mA |
| Color: | Matte black |
| Weight: | 38 g |
| Diameter: | 19 mm |
| Length: | 99 mm |
| Cable drive capability: | 100 m |
| Temperature range: | -40 °C to 45 °C |
| Relative Humidity (RH): | Up to 90% |
