Nexo P10

P-Series 10″ + 1.7″ high-performance speaker
Close

Our price:$4,995.00 GST
Order Code: P10

Available on backorder

Nexo P10 is a high performance 10″ point source speaker with a coaxial configuration for perfect phase alignment, exceptional clarity and a smooth response across the full frequency range.

NEXO has always been well-known for its compact and very powerful point source speakers, ideal in both FOH and wedge application. P10 enclosure uses a 15 mm custom made bent plywood shell, with poplar veneer for the inside layers and birch on the outside. The result is a robust enclosure with exceptionally good sound quality and light weight.

The custom-designed common neodymium magnet coaxial driver with a 2.5” voice coil for the 10” LF driver and a 1.7” diaphragm for the HF motor is the heart of the P10 – and responsible both for its smooth, clean sound and impressive power.

Bass-reflex tuning is done through two computer-optimised shaped ports, which guarantee ultra-low distortion even at very high level. Two large comfortable handles on each side hold a 35 mm pole stand adapter and a Speakon® connector for discrete connection when on pole stand or in wedge monitor mode.

P10 works exceptionally well in a ‘small’ setup with L15 subwoofer adding some low-end reinforcement.

Talk with Factory Sound about the best way to configure a P-Series Nexo system to suit your venue space, or your coverage requirements. We have been Nexo specialists for many years.

Weight: 15kg
WxHxD: 374 x 497 x 274mm

P10 features:

  • Compact, low-profile, curvilinear enclosure
  • 10” LF Neodymium driver and 1.7” diaphragm HF driver in a coaxial configuration
  • Variable HF directivity
  • 136dB peak SPL
  • Threaded inserts on the back and on both sides for connection of mounting accessories
  • Stand fitting on both sides
  • 4x NL4, 4 poles connectors; 2 on the back and 1 on both sides
  • Touring, installation and TIS versions

Specifications

With NEXO Processing
Frequency Response (+6 dB) 63 Hz to 20 kHz
Sensitivity 1W@1m 107 dB SPL Nominal
Peak SPL Level (1m) 136 dB Peak
Recommended Amplifiers 550 to 870 Watts / 8Ω
HF Dispersion (according to horn) 100° x 100° (Default) – 110° x 60° (with 110° x 60° optional horn)
Crossover Frequency 63 Hz, 85 Hz, 120 Hz
Nominal Impedance
Recommended Power 550 to 870 Watts into 8 Ω

Features

Components 1 x Coaxial Neodymium LF 10″ 8 Ohms long excursion & HF 1.7″ 8 Ohms
Number of ways 2 ways passive
Connectors (Touring/TIS versions) 4 x NL4, 4 poles connectors (1 per handle + 2 at the back)
Connectors (Install version) 1 x Cable gland with 2 cores cable
Rigging points 1 x universal accessory fit on each side + 1 x on the bottom
Material Custom made bent plywood of Baltic birch and poplar
Finish Black or White structural paint
Front Finish (Touring version) Magnelis® steel front grille + back mesh
Front Finish (Install/TIS versions) UV resistant acoustic fabric fitted front grill
Height x Width x Depth 497 mm x 384 mm x 274mm (19.6″ x 15.2″ x 10.8″)
Weight: Net 15 kg (33 lbs)
Operating Temperature Range 0°C – 40 °C (32° F – 104° F)
Storage Temperature Range -20 °C – 60 °C (-4 ° F – 140° F)
System Operation
Recommended Powering Solution NXAMP4X1MK2: 1 x P10 per channel
Optional Powering Solutions DTD + DTDAMP4X1.3: Up to 2 x P10 per channel
NXAMP4X2MK2: Up to 4 x P10 per channel
NXAMP4X4MK2: Up to 4 x P10 per channel

You may also like…