4 in stock
Nexo P10 is a high performance 10″ point source speaker with a coaxial configuration for perfect phase alignment, exceptional clarity and a smooth response across the full frequency range.
NEXO has always been well-known for its compact and very powerful point source speakers, ideal in both FOH and wedge application. P10 enclosure uses a 15 mm custom made bent plywood shell, with poplar veneer for the inside layers and birch on the outside. The result is a robust enclosure with exceptionally good sound quality and light weight.
The custom-designed common neodymium magnet coaxial driver with a 2.5” voice coil for the 10” LF driver and a 1.7” diaphragm for the HF motor is the heart of the P10 – and responsible both for its smooth, clean sound and impressive power.
Bass-reflex tuning is done through two computer-optimised shaped ports, which guarantee ultra-low distortion even at very high level. Two large comfortable handles on each side hold a 35 mm pole stand adapter and a Speakon® connector for discrete connection when on pole stand or in wedge monitor mode.
P10 works exceptionally well in a ‘small’ setup with L15 subwoofer adding some low-end reinforcement.
Talk with Factory Sound about the best way to configure a P-Series Nexo system to suit your venue space, or your coverage requirements. We have been Nexo specialists for many years.
Weight: 15kg
WxHxD: 374 x 497 x 274mm
With NEXO Processing |
Frequency Response (+6 dB): 63 Hz to 20 kHz |
Sensitivity 1W@1m: 107 dB SPL Nominal |
Peak SPL Level (1m): 136 dB Peak |
Recommended Amplifiers: 550 to 870 Watts / 8Ω |
HF Dispersion (according to horn): 100° x 100° (Default) – 110° x 60° (with 110° x 60° optional horn) |
Crossover Frequency: 63 Hz, 85 Hz, 120 Hz |
Nominal Impedance: 8Ω |
Recommended Power: 550 to 870 Watts into 8 Ω |
Components: 1 x Coaxial Neodymium LF 10″ 8 Ohms long excursion & HF 1.7″ 8 Ohms |
Number of ways: 2 ways passive |
Connectors (Touring/TIS versions): 4 x NL4, 4 poles connectors (1 per handle + 2 at the back) |
Connectors (Install version): 1 x Cable gland with 2 cores cable |
Rigging points: 1 x universal accessory fit on each side + 1 x on the bottom |
Material: Custom made bent plywood of Baltic birch and poplar |
Finish: Black or White structural paint |
Front Finish (Touring version): Magnelis® steel front grille + back mesh |
Front Finish (Install/TIS versions): UV resistant acoustic fabric fitted front grill |
Height x Width x Depth: 497 mm x 384 mm x 274mm (19.6″ x 15.2″ x 10.8″) |
Weight Net: 15 kg (33 lbs) |
Operating Temperature Range: 0°C – 40 °C (32° F – 104° F) |
Storage Temperature Range: -20 °C – 60 °C (-4 ° F – 140° F) |
System Operation |
Recommended Powering Solution: NXAMP4X1MK2: 1 x P10 per channel |
Optional Powering Solutions: DTD + DTDAMP4X1.3: Up to 2 x P10 per channel |
: NXAMP4X2MK2: Up to 4 x P10 per channel |
: NXAMP4X4MK2: Up to 4 x P10 per channel |
By clicking Sign Up you’re confirming that you agree with our Terms and Conditions.
Weekdays 9:30am – 6:00pm
Saturdays 10:00am – 4:00pm
Sundays Closed