Nexo P12

P-Series 12″ + 3″ high-performance speaker
Close

Our price:$5,995.00 GST
Order Code: P12

Available on backorder

Nexo P12 is a high performance 12″ point source speaker with a coaxial configuration for perfect phase alignment, exceptional clarity and a smooth response across the full frequency range.

NEXO has always been well-known for its compact and very powerful point source speakers, ideal in both FOH and wedge application. P12 enclosure uses a 15 mm custom made bent plywood shell, with poplar veneer for the inside layers and birch on the outside. The result is a robust enclosure with exceptionally good sound quality and light weight.

The custom-designed common neodymium magnet coaxial driver with a 3.5” voice coil for the LF driver and a 3” diaphragm for the HF motor is the heart of the P12 and responsible both for its smooth, clean sound and enormous power.

Bass-reflex tuning is done through two computer-optimised shaped ports, which guarantee ultra-low distortion even at very high level. Two large comfortable handles on each side hold a 35 mm pole stand adapter and a Speakon® connector for discrete connection when on pole stand or in wedge monitor mode.

The back plate holds two Speakon® connectors and a recessed switch to change the cabinet from 2-way passive to 2-way active mode.

P12 works exceptionally well in a ‘small’ setup with L15 subwoofer adding some low-end reinforcement, or with L18 subwoofer if you’re after a bigger system build.

Talk with Factory Sound about the best way to configure a P-Series Nexo system to suit your venue space, or your coverage requirements. We have been Nexo specialists for many years.

Weight: 20kg
WxHxD: 432 x 531 x 317mm

P12 features:

  • Compact, low-profile, curvilinear enclosure
  • 12” LF Neodymium driver and 3” diaphragm HF driver in a coaxial configuration
  • Variable HF directivity
  • Switchable Active/Passive modes
  • 140dB peak SPL (Active Mode)
  • Threaded inserts on the back and on both sides for connection of mounting accessories
  • Stand fitting on both sides
  • 4x NL4, 4 poles connectors; 2 on the back and 1 on both sides
  • Touring, installation and TIS versions

Specifications

Frequency Response (+6 dB) 60 Hz – 20 kHz
Sensitivity 1W@1m 107 dB
Peak SPL Level (1m) 138dB Peak (Passive mode) / 140dB Peak (Active mode)
Recommended Amplifiers 800 to 1250 Watts / 8Ω
HF Dispersion (according to horns) 60°x60° – 90°x40° – Asymmetrical Dispersion 60° to 100°x40°
Crossover Frequency 60 Hz, 85 Hz, 120 Hz
Nominal Impedance Active mode (8Ω LF, 8Ω HF), Passive mode: 8Ω
Recommended Power Active: (800 to 1250 W LF + 400 to 630 W HF) / Passive: 800 to 1250 W

Features

Components LF: 1×12″ – 8Ω; HF : 1×3″ – 8Ω – Neodymium driver
Number of ways (Touring/TIS versions) 2 ways passive (2+/2- P12) or 2 ways active (1+/1- LF, 2+/2- HF) switchable
Number of ways (Install version) 2 ways passives
Connectors (Touring/TIS versions) 4 x NL4, 4 poles connectors (1 per handle + 2 at the back)
Connectors (Install version) 1 x Cable gland with 2 cores cable
Rigging points 1 x universal accessory fit on each side + 1 x on the bottom
Material Custom made bent plywood of baltic birch and poplar
Finish Black or White structural paint
Front Finish (Touring version) Steel front grille + back mesh
Front Finish (Install/TIS versions) Acoustic fabric fitted front gril
Weight : Net 20 kg (44 lbs)
Height x Width x Depth 531mm x 432mm x 317mm (21.0” x 17.0” x 12.3”)
Operating Temperature Range 0°C – 40°C (32°F – 104°F)
Storage Temperature Range -20°C – 60°C (-4°F – 140°F)
System Operation
Recommended Powering Solution NXAMP4X2MK2: Up to 2 x P12 per channel
Optional powering solution DTDcontroller + DTDAMP4x1.3 : 1 x P12 per channel
NXAMP4x1mk2 Powered TDcontroller (Bridged): up to 2 x P12 per channel
NXAMP4x4mk2 Powered TDcontroller: up to 4 x P12 per channel

You may also like…