Nexo P12 is a high performance 12″ point source speaker with a coaxial configuration for perfect phase alignment, exceptional clarity and a smooth response across the full frequency range.
NEXO has always been well-known for its compact and very powerful point source speakers, ideal in both FOH and wedge application. P12 enclosure uses a 15 mm custom made bent plywood shell, with poplar veneer for the inside layers and birch on the outside. The result is a robust enclosure with exceptionally good sound quality and light weight.
The custom-designed common neodymium magnet coaxial driver with a 3.5” voice coil for the LF driver and a 3” diaphragm for the HF motor is the heart of the P12 and responsible both for its smooth, clean sound and enormous power.
Bass-reflex tuning is done through two computer-optimised shaped ports, which guarantee ultra-low distortion even at very high level. Two large comfortable handles on each side hold a 35 mm pole stand adapter and a Speakon® connector for discrete connection when on pole stand or in wedge monitor mode.
The back plate holds two Speakon® connectors and a recessed switch to change the cabinet from 2-way passive to 2-way active mode.
P12 works exceptionally well in a ‘small’ setup with L15 subwoofer adding some low-end reinforcement, or with L18 subwoofer if you’re after a bigger system build.
Talk with Factory Sound about the best way to configure a P-Series Nexo system to suit your venue space, or your coverage requirements. We have been Nexo specialists for many years.
Weight: 20kg
WxHxD: 432 x 531 x 317mm
Frequency Response (+6 dB): 60 Hz – 20 kHz |
Sensitivity 1W@1m: 107 dB |
Peak SPL Level (1m): 138dB Peak (Passive mode) / 140dB Peak (Active mode) |
Recommended Amplifiers: 800 to 1250 Watts / 8Ω |
HF Dispersion (according to horns): 60°x60° – 90°x40° – Asymmetrical Dispersion 60° to 100°x40° |
Crossover Frequency: 60 Hz, 85 Hz, 120 Hz |
Nominal Impedance: Active mode (8Ω LF, 8Ω HF), Passive mode: 8Ω |
Recommended Power: Active: (800 to 1250 W LF + 400 to 630 W HF) / Passive: 800 to 1250 W |
Components: LF: 1×12″ – 8Ω; HF : 1×3″ – 8Ω – Neodymium driver |
Number of ways (Touring/TIS versions): 2 ways passive (2+/2- P12) or 2 ways active (1+/1- LF, 2+/2- HF) switchable |
Number of ways (Install version): 2 ways passives |
Connectors (Touring/TIS versions): 4 x NL4, 4 poles connectors (1 per handle + 2 at the back) |
Connectors (Install version): 1 x Cable gland with 2 cores cable |
Rigging points: 1 x universal accessory fit on each side + 1 x on the bottom |
Material: Custom made bent plywood of baltic birch and poplar |
Finish: Black or White structural paint |
Front Finish (Touring version): Steel front grille + back mesh |
Front Finish (Install/TIS versions): Acoustic fabric fitted front gril |
Weight Net: 20 kg (44 lbs) |
Height x Width x Depth: 531mm x 432mm x 317mm (21.0” x 17.0” x 12.3”) |
Operating Temperature Range: 0°C – 40°C (32°F – 104°F) |
Storage Temperature Range: -20°C – 60°C (-4°F – 140°F) |
System Operation |
Recommended Powering Solution: NXAMP4X2MK2: Up to 2 x P12 per channel |
Optional powering solution: DTDcontroller + DTDAMP4x1.3 : 1 x P12 per channel |
: NXAMP4x1mk2 Powered TDcontroller (Bridged): up to 2 x P12 per channel |
: NXAMP4x4mk2 Powered TDcontroller: up to 4 x P12 per channel |
By clicking Sign Up you’re confirming that you agree with our Terms and Conditions.
Weekdays 9:30am – 6:00pm
Saturdays 10:00am – 4:00pm
Sundays Closed