Rode

Rode PINMIC

Lapel mic, with innovative pin-through design

Order Code: PINMIC
Enquire
Our Price: $269.00

Not only is this ripper little PinMic easier to conceal than a traditional lapel microphone, but provides greater mounting versatility. Comprised of a cabled backplate and a removable omni-directional capsule head, the PinMic is easily mounted onto any clothing or fabric by simply pushing the backplate pins through the back of the fabric and sliding the capsule into place on the front. The microphone backplate and cable are hidden behind the fabric, and the capsule head can be easily disguised, covered or decorated to further conceal the microphone.

Only 9mm deep and 11mm in diameter, supplied with both a black and an unpainted silver mesh head that can be further camouflaged by painting. The microphone easily mounts through any fabric up to 1.5mm thick without any damage to clothing.

Photo of Rode PINMIC available from Factory Sound
  • Pinmic
  • Pinmic_furry
  • Pinmic_pack
  • Pinmic_jacket

The microphone capsule is connected via a 1.2m shielded, detachable Kevlar reinforced cable that has been rigorously strain tested to ensure reliable performance.

The included mini-furry for high wind protection ensures quality recordings in adverse environments, while the anti-trauma water resistant case provides rugged and secure protection for the microphone, a spare capsule head, the microphone cable and included accessories.

Acoustic Principle Pressure Gradient
Active Electronics JFET impedance converter
Capsule 0.10"
Polar Pattern Omnidirectional
Address Type End
Frequency Range 60Hz - 18kHz
Output Impedance 3000Ω
Maximum SPL 110dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum Output Level 189.0mV (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted) 25dB-A
Power Options +48V phantom power
(P48 through MiCon-5 adaptor, 2V~5V through all other MiCon adaptors)
Weight 10.00gm
Dimensions 16.00mmH x 22.00mmW x 33.00mmD
Output Micon Output
Warranty 1 year with free extension to 5 years following registration here