General specifications |
Signal delay: Less than 1.7 ms, Rio INPUT to Rio OUTPUT connect with PM10 using Dante, Fs= 96 kHz, Dante Receive Latency set to 0.25 msec |
Total harmonic distortion: Less than 0.05% 20 Hz-20 kHz@+4 dBu into 600Ω, Fs= 48 kHz, Less than 0.05% 20 Hz-40 kHz@+4 dBu into 600Ω, Fs= 96 kHz, INPUT to OUTPUT, Input Gain= Min. |
Frequency response: +0.5, –1.5 dB 20 Hz-20 kHz, refer to +4 dBu output @1 kHz, INPUT to OUTPUT, Fs= 48 kHz / +0.5, –1.5 dB 20 Hz-40 kHz, refer to +4 dBu output @1 kHz, INPUT to OUTPUT, Fs= 96 kHz |
Dynamic range: 112 dB typ., DA Converter, 108 dB typ., INPUT to OUTPUT, Input Gain= Min. |
Residual output noise: –88 dBu, ST master off |
Crosstalk: -100dB, adjacent INPUT/OUTPUT channels, Input Gain = -6dB, @1 kHz *Measured with a 30dB/octave filter @22kHz |
Power requirements: 100-240V, 50/60Hz |
Power consumption: 120W |
H: 220 mm (8.7″) |
D: 368 mm (14.5″) |
Net weight: 13.5 kg (29.8 lbs) |
Accessories: Owner’s Manual, AC power cord (250cm), Dante Virtual Soundcard Token leaflet |
Others: NC Value: FAN MODE LOW: NC=20 / HIGH: NC=30 (Measurement position: 1 m from the front of the unit), Operating temperature range: 0 – 40°C, Storage temperature range: –20 – 60°C |
Total Harmonic Distortion is measured with 18 dB/octave filter @80 kHz |
Hum & Noise are measured with A-Weight filter. |
Crosstalk is measured with a 30 dB/octave filter @22 kHz |
By clicking Sign Up you’re confirming that you agree with our Terms and Conditions.
Weekdays 9:30am – 6:00pm
Saturdays 10:00am – 4:00pm
Sundays Closed