Yamaha XMV4280

Close

Our price:$3,130.00 GST
Order Code: XMV4280

Contact us for expected arrival, queue backorder

4x 280W @ 4 or 8 ohms. 2x 560W @ 4 or 8 ohm double-power mode. 4x 250W 100V/70V-line.

Equipped with the newly developed YDIF digital audio format for easy setup.

  • 4x 280W at 8Ω/4Ω
  • 4x 250W at 100V/70V lines
  • 2x 560W at Double Power Mode (8Ω/4Ω)
Output power1kHz (THD+N=1%: 4Ω)280W x 4
1kHz (THD+N=1%: 8Ω)280W x 4
1kHz (THD+N=1%: 4Ω / Double Power Mode)560W x 2
1kHz (THD+N=1%: 8Ω / Double Power Mode)560W x 2
High impedance: 100V line250W x 4 / 40 Ω
High impedance: 70V line250W x 4 / 20 Ω
Voltage GainRL=8Ω31.7dB
RL=8Ω / Double Power Mode34.7dB
100V38.2dB
70V35.2dB
Power consumption1/8 power (4 Ω pink noise):250W, Idle (4 Ω):37W, Standby:18.5W
Total harmonic distortion≤ 0.2% (1kHz, half power)
Frequency response0dB, ±1.0dB (RL=8Ω, 100V/70V, Po=1W, 20Hz – 20kHz)
S/N ratio≥ 100dB(A-weighted)
Crosstalk≤ -60dB
Input sensitivity+4dBu
Input impedance20kΩ (balanced), 10k Ω (unbalanced)
I/O ConnectorsAnalog I/OInput: Euroblock x 2 (6P, balanced)
Digital I/ORJ45 x 2 (YDIF IN / OUT)
Speaker OutputBarrier strip x 4 pairs
Control portsRemote, Fault Output : Euroblock (3P) x 1
NetworkRJ45 x 1
OthersAC Inlet x 1
Input Level+24dBu (Maximum)
Protection circuitLoad protectionPOWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting
Amplifier protectionThermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically), Low load impedance: Output mute (Restored automatically)
Power supply protectionThermal: Amplifier shuts down automatically (heatsink temp ≥100°C) , Integrated power: Gain reduction (Restored automatically)
Cooling3-Speed fan x 2, front-to-back airflow
Power requirements100V, 120V, 230V-240V; 50Hz/60Hz
DimensionsW480mm (18.9″)
H88mm (3.5″)
D422mm (16.6″)
Net weight8.1kg (17.9lbs)