Yamaha XMV8140-D

Close

Our price:$4,550.00 GST
Order Code: XMV8140-D

Contact us for expected arrival, queue backorder

As XMV8140 with Dante connectivity in place of YDIF.

Dante models for larger venues where long distance cabling is require.

  • 8 x 140W at 8Ω/4Ω
  • 8 x 125W / 40Ω 100V/70V lines
  • 4 x 280W at Double Power Mode (8Ω/4Ω)
Output power1kHz (THD+N=1%: 4Ω)140W x 8
1kHz (THD+N=1%: 8Ω)140W x 8
1kHz (THD+N=1%: 4Ω / Double Power Mode)280W x 4
1kHz (THD+N=1%: 8Ω / Double Power Mode)280W x 4
High impedance: 100V line125W x 8 / 80 Ω
High impedance: 70V line125W x 8 / 40 Ω
Voltage GainRL=8Ω28.7dB
RL=8Ω / Double Power Mode31.7dB
100V38.2dB
70V35.2dB
Power consumption1/8 power (4 Ω pink noise):250W, Idle (4 Ω):73W, Standby:23W
Total harmonic distortion≤ 0.2% (1kHz, half power)
Frequency response0dB, ±1.0dB (RL=8Ω, 100V/70V, Po=1W, 20Hz – 20kHz)
S/N ratio≥ 100dB(A-weighted)
Crosstalk≤ -60dB
Input sensitivity+4dBu
Input impedance20kΩ (balanced), 10k Ω (unbalanced)
I/O ConnectorsAnalog I/OInput: Euroblock x 2 (6P, balanced)
Digital I/ORJ45 x 2 (Dante PRIMARY / SECONDARY)
Speaker OutputBarrier strip x 8 pairs
Control portsRemote, Fault Output : Euroblock (3P) x 1
NetworkShared with Dante ports
OthersAC Inlet x 1
Input Level+24dBu (Maximum)
Protection circuitLoad protectionPOWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting
Amplifier protectionThermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically), Low load impedance: Output mute (Restored automatically)
Power supply protectionThermal: Amplifier shuts down automatically (heatsink temp ≥100°C) , Integrated power: Gain reduction (Restored automatically)
Cooling3-Speed fan x 2, front-to-back airflow
Power requirements100V, 120V, 230V-240V; 50Hz/60Hz
DimensionsW480mm (18.9″)
H88mm (3.5″)
D422mm (16.6″)
Net weight10.1kg (22.3lbs)