Yamaha XMV8280-D


Our price:$6,160.00 GST
Order Code: XMV8280-D

Contact us for expected arrival, queue backorder

As XMV8280 with Dante connectivity in place of YDIF.

Dante models for larger venues where long distance cabling is require.

  • 8 x 280W at 8Ω/4Ω
  • 8 x 250W / 40Ω 100V/70V lines
  • 4 x 560W at Double Power Mode (8Ω/4Ω)
Output power 1kHz (THD+N=1%: 4Ω) 280W x 8
1kHz (THD+N=1%: 8Ω) 280W x 8
1kHz (THD+N=1%: 4Ω / Double Power Mode) 560W x 4
1kHz (THD+N=1%: 8Ω / Double Power Mode) 560W x 4
High impedance: 100V line 250W x 8 / 40 Ω
High impedance: 70V line 250W x 8 / 40 Ω
Voltage Gain RL=8Ω 31.7dB
RL=8Ω / Double Power Mode 34.7dB
100V 38.2dB
70V 35.2dB
Power consumption 1/8 power (4 Ω pink noise):450W, Idle (4 Ω):73W, Standby:23W
Total harmonic distortion ≤ 0.2% (1kHz, half power)
Frequency response 0dB, ±1.0dB (RL=8Ω, 100V/70V, Po=1W, 20Hz – 20kHz)
S/N ratio ≥ 100dB(A-weighted)
Crosstalk ≤ -60dB
Input sensitivity +4dBu
Input impedance 20kΩ (balanced), 10k Ω (unbalanced)
I/O Connectors Analog I/O Input: Euroblock x 2 (6P, balanced)
Digital I/O RJ45 x 2 (Dante PRIMARY / SECONDARY)
Speaker Output Barrier strip x 8 pairs
Control ports Remote, Fault Output : Euroblock (3P) x 1
Network Shared with Dante ports
Others AC Inlet x 1
Input Level +24dBu (Maximum)
Protection circuit Load protection POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting
Amplifier protection Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically), Low load impedance: Output mute (Restored automatically)
Power supply protection Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C) , Integrated power: Gain reduction (Restored automatically)
Cooling 3-Speed fan x 2, front-to-back airflow
Power requirements 100V, 120V, 230V-240V; 50Hz/60Hz
Dimensions W 480mm (18.9″)
H 88mm (3.5″)
D 422mm (16.6″)
Net weight 10.1kg (22.3lbs)